Mica Adhesive

Mica High Temperature Ceramic Adhesive application.

Cotronics® Resbond® high temperature adhesive are based on high purity ceramic binders and selected reinforcing fillers.

These adhesives have excellent adhesion to ceramics, metals, glass and plastics. They offer excellent high temperature stability, dielectric strength, mechanical properties and thermal shock resistance.

Mica Adhesives

Resbond® 907

Resbond® 904 is a single component Ceramic Composite based on Mica platelets and proprietary ceramic binders. Resbond® 907 all-purpose adhesive offers high bond strength, solvent and electrical resistance. Safe to use. No objectionable or toxic odours. Use from -130°C to 1260°C. Resbond® 907 was developed to provide a Fire Proof Adhesive for applications in production, development, repair and maintenance. Just apply directly to clean steel, iron, lead, ceramics, most metals, etc. without any special surface treatment. Air dries in 24 - 48 hours at room temp. or in 1 hour at 120°C.

Resbond® 907GF

Resbond® 907GF Fireproof Adhesive and Sealant is a moist, creamy putty for use from -180°C to 1285°C. It is easily applied from standard caulking cartridges and air dries in 4- 12 hours at room temperature. Curing may be accelerated with mild heat. Resbond® 907GF has excellent adhesion to clean steel, stainless, iron, most metals, ceramics, ceramic cloths, tapes, gaskets, tadpoles’ gaskets, etc. Resistant to most chemicals, solvents, oxidizing and reducing atmospheres, aging, thermal cycling, and electricity. Packaged in convenient dispenser tubes and standard caulking cartridges. Resbond® 907GF is ideal for use in any high temperature Assembly, Production, Repair or Maintenance Application.

Technical data

Mica Cement Adhesive

907

907GF

Peak Temperature

°C

1260

1650

Components

 

1

1

Consistence

 

Paste

Mastic

Charge

 

Mica

Mica

Compressive Strength

N/mm² (20°C)

24.1

10.3

Flexural Strength

N/mm² (20°C)

8.6

 -

Thermal Conductivity

W/mK

0.86

0.86

Thermal Expansion

x 10-6 K-1

8.1

 -

Dielectric Strength

kV/mm

11.7

5.6

Resistivity

Ω.cm

109

109

Mix Ratio

Powder - Binder

N.A.

N.A.

Cure Temp.

Hrs @

Room Temp.

24h

24 – 48h

Cure Temp.

°C

120°C

1h @ 120-175°C

Cotronics® - Mica Adhesives (216.22k)

Technical data sheet: Mica Cement Adhesive by Cotronics®.


Cotronics® - Ceramic Adhesives (667.26k)

Technical data sheet: full range of Cotronics® Ceramic Adhesives


SDS - Mica Gasket (100.36k)

SAfety Data Sheet - Mica gasket


Mica (246.75k)

General Technical Data Sheet


Image générique

Resbond® 907R mica adhesive

Cotronics Resbond ® 907R adhesive is a mica based bonding ceramic cement . It is used to make high temperature bonding, up to 1260°C. This product is available in 0.23, 0.94 et 1.8 litres. For bigger packaging please contact us. We also offer other high temperature mica adhesives . 
Full description
Image générique

Resbond® 907GF mica adhesive

Cotronics Resbond ® 907GF is a mica based bonding ceramic cement . It is used to make high temperature bonding, up to 1650°C. This product is available in 0.23, 0.94 and 1.8 litres. For bigger packaging please contact us. We offer a variety of  high temperature mica adhesive products. 
Full description
Cotronics Resbond 907GF ceramic adhesive high temperature

Resbond® 907GF mica adhesive (cartridge)

Cotronics Resbond ® 907GF adhesive is a mica-based ceramic bonding cement . It is used for high temperature bonding up to 1650°C. The 907GF is packaged in ready-to-use cartridges . For larger sizes, please contact us. We offer a variety of  high temperature mica adhesive products. 
Full description
Image générique

Resbond® 907T mica binder

Cotronics Resbond ® 907T binder is a single component mica based fluidizer. It is used to fluidify Resbond ® 907 . It is recommended that no more than 5% binder is added to the ceramic cement . It is available in 0.94 litres. For larger packs, please contact us. We also offer other  high temperature mica adhesives . 
Full description