Share this page by mail Nano T-Ultra Nanoporous Silica Composite
Nano T-Ultra Composite
Nanoporous ceramic are extremely light products for insulation purposes. Their high insulation capacity is a direct result of their nanoporous structure. There are only temporary contacts between particles and the surface ratio is the lowest possible. As a result, the thermal conduction between solid particles is reduced to a minimum. Nanopores also limit convective heat transfer.
All these characteristics make this type of material more efficient than conventional insulating materials such as mineral fibres, refractory bricks and other inorganic products.
This product consists of silica and opacifying agents to minimize infrared radiation.
This material can be protected by various types of packaging, in order to facilitate its use and conservation. For example, PE film or aluminium foils can be employed as a reinforcing material. This packaging also protects the product against mould. Nano T must also be protected against liquids, which may destroy its nanoporous structure.
Applications of Nanoporous Silica Composite
- Tapping launders
- Refractory coatings
- Storage, heating systems
- Melting furnaces
- Industrial furnaces
- Flame protection
- Thermal insulation
- Glass treatment
Main Characteristics of Nanoporous Silica Composite
- Resistance to high temperatures
- Very low thermal conduction
- Good machinability for shaping parts
- Reinforcement by PE film, aluminium foil and more available
- Class A1 flame protection
- Thermal shock resistance
- Excluded from all carcinogenic classifications
- Stored as a non-hazardous and non-pollutant product
- Protective packaging is required
Available Nanoporous Silica Products
|
Product |
Type |
Dimensions |
Thickness |
|
115-1000 |
Board |
1,000 x 650 mm |
10, 12,15, 17, 20, 25, 30, 35, 40, 45, 50 mm |
|
Customed designs are available on request. |
|||
Storage
This product can be stored indefinitely in a dry environment, and may be resistant to humidity, provided that condensation is prevented.
Technical Data of Nanoporous Silica Composite
|
Property |
Unit |
Nano T Ultra |
||||||||||
|
Item N° |
115-1000 |
|||||||||||
|
Chemical Composition, after firing |
SiO2 |
% |
75-85 |
|||||||||
|
SiC |
12-20 |
|||||||||||
|
Other |
3-10 |
|||||||||||
|
Ignition Loss |
% |
< 1.5 |
||||||||||
|
Density |
kg/m3 |
230 |
||||||||||
|
Fire Classification |
°C |
950 |
||||||||||
|
Cold Compressive Strength |
MPa |
0.42 |
||||||||||
|
Shrinkage |
Both side at 950 °C, 24 hrs |
% |
< 3 |
|||||||||
|
One side at 950 °C, 12 hrs |
< 0.5 |
|||||||||||
|
Thermal Conductivity |
at 200 °C |
W.m-1.K-1 |
0.02 |
|||||||||
|
at 400 °C |
0.027 |
|||||||||||
|
at 600 °C |
0.034 |
|||||||||||
|
at 800 °C |
0.044 |
|||||||||||
Physical variables included in this documentation are provided by way of indication only and do not, under any circumstances, constitute a contractual undertaking. Please contact our technical service if you require any additional information.