Calcium silicate composite

Calcium silicate machinable thermal insulation

Overview: Calcium Silicate Composite

Calcium silicate is a powder with the formula Ca2SiO4. This technical composite is primarily employed for its excellent high-temperature properties. 

Calcium silicate is a low-density material, white in colour. It is odourless and poses no known health risks. Its derivatives are highly valued for their low thermal conductivity, their high resistance to heat and their limited dimensional shrinkage.

Implementation

Calcium silicate composites can be sawn, bevelled, drilled, screwed and machined with traditional machines, tools and techniques

For cutting and processing, tools with hard metal tips must be used. The cutting equipment must include a dust extraction system.

Applications of Calcium Silicate Composite

  • Fire protection -building applications
  • Electrical insulation
  • Steel making for contact with non-ferrous liquid metal
  • Thermal insulation - mechanical parts
  • High-performance thermal insulation
  • Protection against sparks
  • Hot pipe/duct supports
  • Support pads
  • Heat band supports

Main Characteristics of Calcium Silicate Composite

  • Low thermal conductivity
  • Very good resistance to high temperatures
  • Electrical insulation
  • Low shrinkage
  • Good resistance to compression
  • Inflammable
  • Inert material
  • Easy-to-use

Packing and Storage of Calcium Silicate Composite

Products must be dry-stored. Dry in steriliser before use if the product has been stored for a long time.

Calcium Silicate Composite Products

LUX

LUX calcium silicate is a thermal insulation product with a very low conductivity. It is incombustible and fire-resistant and can be used in buildings to ensure fire resistance for up to 240 minutes.

The product contains no asbestos, is insensitive to corrosion and does not react with other materials. LUX calcium silicate contains no inorganic fibres.

Main Properties

  • Low thermal conductivity
  • Resistant to fire up to 240 min
  • Moisture-resistant
  • Corrosion-resistant
  • Solvent-resistant
  • Easy-to-use
  • Asbestos-free

Applications

  • Press insulation panel
  • Furnaces and dryers
  • Heat protection
  • Thermal barrier mechanical parts
  • Boiler separator

DXP

Calcium silicate composite DXP is reinforced with fibreglass which enhances its mechanical performance. It is asbestos-free. It has very good thermal and electrical insulation, stable up to a temperature of 700 °C. 

Main properties

  • Stable up to 700 °C (900 °C peak)
  • High mechanical resistance
  • Easy-to-use
  • High-performance electrical insulation
  • Dust-free
  • Asbestos-free
  • Strong
  • Thermal insulation

Applications

  • Industrial furnace components: cast iron and heating
  • Electrical insulation: arc protection (blow box)

M1 and M1A

Calcium silicate products M1 and M1A are used in foundries, furnace construction and other industrial applications. These products are suitable for contact with liquid metals up to 850 °C (M1) or 1,000 °C (M1A) with very low shrinkage.

Main properties

  • It does not wet when in contact with melting metal*
  • Insensitive to corrosion*
  • No reaction to contact with graphite or boron nitride lubricants
  • Low thermal conductivity
  • Chemically stable in neutral and alkaline environments (reacts in acidic environments)
  • High thermal and mechanical resistance
  • Asbestos-free
  • Easy-to-use

*non-ferrous metals and alloys (Al, Mg, Zn, Sn, Pb)

Applications

  • Non-ferrous metal melting and casting equipment: for transport, distribution and continuous or cyclic moulding.
  • Furnace construction: loading plates, coatings in direct contact with metal, mechanical parts.
  • Chemical industry: mechanical parts

P1100S

P1100S is a stand-out product in the range, due to its superior thermal and mechanical properties. It provides solutions for applications which are normally unsuited to conventional calcium silicate products.

These large-scale insulating panels have a lightweight structure with a stable mineral matrix. This particular feature of production delivers a smaller and more easily controlled pore size. The incorporation of opacifying agents permits a further reduction in thermal conductivity.

Main properties

  • Extremely low thermal conductivity
  • Low shrinkage
  • Good mechanical resistance
  • Very good thermal insulation
  • Stable at high temperatures
  • Light
  • Easy-to-use

Applications

  • Petrochemical
  • Furnaces
  • Steel industry
  • Food industry
  • Glass industry
  • Aluminium industry

D1000C

Calcium silicate composite D1000C is abestos-free and does not contain any organic binder. It has very good thermal and electrical insulation properties and stays stable up to 1,000 °C. This product has a high dielectric strength and arc resistance. 

Main properties

  • Thermal insulation
  • Stable up to 1,000 °C
  • High mechanical resistance
  • High-performance electrical insulation
  • Chemically stable in alkaline environments (reacts in acidic environments)
  • Good arc resistance,
  • High resistivity
  • Dust-free
  • Non-combustible
  • No organic binders
  • Asbestos-free
  • Easy-to-use

Applications

  • Support parts for industrial furnaces
  • Insulators for metal smelting
  • Electrical insulation
  • Electrical arc protection for connection equipment
  • Thermal and electrical separators

PRO-H

PRO-H is a non-combustible insulation board made from special calcium silicates reinforced with special fibres and fillers.

It is off-white and its finish is smooth on one side and sanded on the other side. The board can be left uncoated or can be easily painted or lined. 

It is resistant to moisture and does not deteriorate when used in potentially wet conditions. Its performance does not degrade with age or the presence of moisture.

Main properties

  • Moisture-resistant
  • Performance does not degrade with age or the presence of moisture

Applications

  • Tunnel coating
  • Protection of concrete walls and floors
  • Service compartments
  • Panels and access hatches
  • Fire doors
  • Protection of steel structures
  • Ceiling membranes
  • Steel duct covering
  • Self-supporting ducts
  • Utility shafts
  • Partitions (EI)
  • Concrete structure protection (R)
  • Filling for fixed frames
  • Glass partition frames (EI)

Technical Data of Calcium Silicate Composite

The technical data table for the available Calcium Silicate Composite can be downloaded in the data sheet.

Physical variables included in this documentation are provided by way of indication only and do not, under any circumstances, constitute a contractual undertaking. Please contact our technical service if you require any additional information.

Calcium Silicate Composite (242.82k)

Calcium Silicate Composite


Composite Materials (387.24k)

Composite Materials