Crucibles made by isostatic pressing

Final Advanced Materials offers a range of melting crucibles that are made by isostatic pressing. For non-ferrous metals only.

Compatible metals

  • Brass
  • Aluminium
  • Zinc
  • Precious metals


  • Crucibles from 30 g to 5 tons
  • Height of 29 to 1600 mm
  • Maximum diameter 950 mm


  • Energy savings thanks to rapid heating
  • Constant calorific value
  • Good resistance to chemical attacks
  • Reduced dirt deposits

Crucibles and accessories of various shapes and sizes available on request, in all qualities. Just send us your design or specific dimensions.

Available products

  • 232 - G-SiC : Isopressed graphite-silicon carbide crucibles for melting and holding aluminium, brass, zinc distillation and for induction furnaces.

  • 232 - G-SiC IM : Isopressed graphite-silicon carbide crucibles, double-fired, with a ceramic solidification and special glaze, particularly suitable for melting and holding aluminium in electric furnaces and for brass.

  • 232 - SiC X : Resin-bonded high-capacity isopressed silicon carbide crucibles for melting light and heavy metals in fuel furnaces.

  • 232 - SiC XO : Resin-bonded isopressed silicon carbide crucibles for melting light and heavy metals in fuel furnaces, for melting heavy metals in electric resistance furnaces and for waste recycling.

Instructions for use

  • Ceramic crucibles must be left empty at their working temperature.

  • Tools must be designed so as not to damage or grip the crucible without a pressure point.

  • Do not push materials into the crucible.

  • If possible, bars and large metal parts should be preheated and carefully placed in the crucible using the pliers. Do not drop metal parts into the crucible.

  • The crucible must be emptied at the end of the day. Do not leave metal waste to cool in the crucible.

  • Ensure the crucible is always filled.

  • If using chemical melting preparations, ensure these products never come into direct contact with the crucible. The action time of these products should be reduced as much as possible.

  • If possible, molten metal should be used immediately once it has reached the desired temperature.

  • Empty the waste from the crucible every day while it is still hot. Clean it thoroughly. Good maintenance increases the life of the crucible. Always use the appropriate tools.

Crucibles (857.34k)

Technical data sheet crucibles.