List of products by brand COTRONICS


FINAL Advanced Materials can provide all the Cotronics High Temperature products

COTRONICS develops and markets a whole range of high temperature materials for applications from -200 ° C to + 3000 ° C

COTRONICS offers :

- Epoxy adhesives for electrical and thermal insulation , the thermal conduction and electric , chemical resistance , optical applications,…

- Ceramic adhesives < / a> for bonding metals, glass, ceramics and graphites

- Molding ceramics , coatings, mastics

- Machinable ceramics

- Thermal insulation fiber in the form of tablecloths, felts, fabrics, strips, sheaths, papers, ...

360M Ceramic Binder

360M Ceramic Binder

Cotronics Resbond® 360 M binder, based on alumina, is used as a fluidizer. It is mouldable and machinable at high temperatures. It has a low thermal conductivity and is resistant to thermal shock up to 1260°C.  It is used to fluidise Resbond® 360M . It is recommended that no more than 5% binder is added to the ceramic cement . It is packaged in 0.94 litre.  For larger quantities, please contact us. 
Full description
372HT Moldable sheet

372HT Moldable sheet

Cotronics 372HT is a  wet moldable sheet that will adpat to all geometries. After drying, we achieve a thermal and light insulation which resists to thermal shocks. The sheet is made up of refractory fibers resistant up to 2700°C. This product is available in thickness 12mm, width 600mm and length 3800mm or 1830mm, for bigger packaging please contact us.
Full description
Binder for Resbond® 906...

Binder for Resbond® 906 single component

Cotronics Resbond® 906 adhesive is a magnesia based  bonding ceramic cement . It is used to make high temperature bonding, up to 1650°C. Resbond® 906 can be fluidified with the 906T specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0.47, 0.94 and 3.7 litres. For larger sizes, please contact us. We also offer other  high temperature adhesives . 
Full description
Binder for Resbond® 907...

Binder for Resbond® 907 Single component

Cotronics  Resbond® 907T  binder is a single component mica based fluidizer. It is used to fluidise Resbond® 907TS . It is recommended that no more than 5% binder is added to the  ceramic cement . It is available in 0.94 litre packs. For larger packs, please contact us. We also offer other  high temperature mica adhesives .   
Full description
Binder for Resbond® 918...

Binder for Resbond® 918 single-component

Cotronics Resbond® 918T-1 silica-based binder is used to thin Resbond® 918 . It is recommended not to add more than 5% binder to the ceramic cement . It is available in 0.94 litre containers. For bigger sizes, please contact us. We also propose other high temperature silica adhesives . 
Full description
Bond-IT 007 HT adhesive

Bond-IT 007 HT adhesive

Cotronics Bond-IT 007 is a HT adhesive. It has excellent adhesion to metals, ceramics, glass and plastics. It is the best adhesive for attaching difficult assemblies up to 230°C. This product is available in 0.028 and 0.23 litres. For bigger packaging please contact us.
Full description
Bond-IT™ 7056AL Machinable...

Bond-IT™ 7056AL Machinable epoxy

Cotronics Bond-IT 7056AL is a machinable repair epoxy. It cures at room temperature. It has excellent adhesion to metals, plastics, ceramics… It resists up to 230°C. This product is available in 0.05 and 0.22 litres. For bigger packaging please contact us. 
Full description
Ceramic binder 989FST

Ceramic binder 989FST

Cotronics  Resbond® 989FST  alumina based binder is used to fluidify cement. It is used to fluidify the Resbond® 989FS ceramic cement. Do not add more than 5% of  binder to the cement . This product is available in 0.47 and 3.7 litres.    For larger sizes, please contact us. We also offer other  high temperature adhesives . 
Full description
Durabond® 7032 Mastic

Durabond® 7032 Mastic

Durabond® 7032 is a mastic charged with stainless steel. It has an excellent thermal resistance. Easy to machine, it resists to solvents and chemicals up to 1100°C. This product is available in 0.12, 0.23, 0.47 and 0.94 kilogrammes, for bigger packaging please contact us.
Full description
Durabond® A54B Mastic

Durabond® A54B Mastic

Cotronics Durabond® A54B  mastic restists to corrosion. It also resists to solvents and chemicals up to 260°C. It cures easily. This product is available in 0.47 or 3.7 litres, for bigger packaging please contact us. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Cotronics Duralco 120 Adhesive epoxy high temperature electrically conductive

Duralco® 120 Adhesive epoxy

Cotronics Duralco® 120 adhesive is a bonding epoxy resin for high temperature applications. It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with silver powder. This adhesive is a good electric conductor. This product is available in 52 grammes. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Duralco® 122 Adhesive epoxy

Duralco® 122 Adhesive epoxy

Cotronics Duralco® 122 adhesive is a bonding epoxy resin for high temperature applications. It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with nickel powder. This adhesive is a good electric conductor. This product is available in 113 grammes. Please contact us for bigger packagings. We also provide other types of  high temperature adhesives and glues
Full description
Duralco® 124 Adhesive epoxy

Duralco® 124 Adhesive epoxy

Cotronics Duralco® 124 adhesive is a bonding epoxy resin for high temperature applications. It is used to make high temperature bonding, up to 340°C. This 2 components epoxy adhesive is charged with silver powder. This adhesive is a good electric conductor. It needs a heat curing. This product is available in 64 grammes. Please contact us for bigger packagings. We also provide other types of  high temperature adhesives and glues
Full description
Cotronics Duralco 125 Adhesive epoxy high temperature electrically conductive

Duralco® 125 Adhesive epoxy

Cotronics Duralco® 125 adhesive is a bonding epoxy resin for high temperature applications. It is used to make high temperature bonding, up to 230°C. This 2 components epoxy adhesive is charged with silver powder. This adhesive is a good electric conductor. This product is available in cartridge of 28 grammes and in 225 grammes jar.  Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Duralco® 126 Adhesive epoxy

Duralco® 126 Adhesive epoxy

Cotronics Duralco® 126 adhesive is a bonding  epoxy resin for high temperature applications. It is used to make high temperature bonding, up to 230°C. This single component epoxy adhesive is charged with silver powder. This adhesive is a good electric conductor. This product is available in 52 grammes. Please contact us for bigger packagings. We also provide other types of  high temperature adhesives and glues.
Full description
Duralco® 127 Adhesive epoxy

Duralco® 127 Adhesive epoxy

Cotronics Duralco® 127 adhesive is a bonding epoxy resin for high temperature applications. It is used to make high temperature bonding, up to 200°C. This 2 components epoxy adhesive is charged with graphite powder. This adhesive is a good electric conductor. This product is available in syringe of 56 grammes. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues
Full description
Duralco® 128 Adhesive epoxy

Duralco® 128 Adhesive epoxy

Cotronics Duralco® 128 adhesive is a bonding epoxy resin. It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with alumina powder . This adhesive is a good electric conductor. This product is available in 0.23, 0.47 and 3.7 grammes. For bigger packaging please contact us. We offer other products that may meet the requirements of your application: Our other  electrically conductive epoxy resin All our  high temperature adhesives  Our  epoxy products
Full description
Duralco® 132 Adhesive epoxy

Duralco® 132 Adhesive epoxy

Cotronics Duralco® 132 adhesive is a bonding epoxy resin for high temperature applications. It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with aluminum powder. This adhesive is a good electric conductor. This product is available in 450 and 900 grammes. For bigger packaging please contact us. We also offer other  thermally conductive adhesives for high temperature bonding.
Full description
Duralco® 133 Adhesive epoxy

Duralco® 133 Adhesive epoxy

Cotronics Duralco® 133 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 315°C. This 2 components epoxy adhesive is charged with aluminum powder. This adhesive is a good electric conductor. It needs a heat curing. This product is available in 0.23 litres.  For bigger packaging please contact us. We also offer other  thermally conductive adhesives  for high temperature bonding.
Full description
Duralco® 134 Thermal Grease

Duralco® 134 Thermal Grease

Cotronics Duralco® 134 is a ceramic based grease which cures at room temperature for high temperature applications. It is ideal for use between electronic components and heat sinks. Usable to 260°C. This single component grease is charged with alumina powder. This product is available in 225 grammes. For bigger packaging please contact us. We also offer other  thermally conductive adhesives  for high temperature bonding.
Full description
Duralco® 135 Adhesive epoxy

Duralco® 135 Adhesive epoxy

Cotronics Duralco® 135 is a ceramic based grease which cures at room temperature. It is ideal for use between electronic components and heat sinks. Usable to 260°C. This single component grease is charged with aluminum powder. This product is available in 0.12 and 0.23 litres.  Please contact us for bigger packagings. We also provide thermally conductive epoxy resins .
Full description
Duralco® 201 HT Coating

Duralco® 201 HT Coating

Cotronics Duralco® 201 coating resists to corrosion and moisture. It protects against gaz and organic solvents and is usable up to 650°C. The coating forms an aluminum layer over metals. This product is available in 0.47, 0.94 and 3.7 litres. Please contact us for bigger packagings. We also provide other types of   high temperature surface coating products.
Full description
Duralco® 230 HT Coating

Duralco® 230 HT Coating

Cotronics Duralco® 230 is a stainless steel based coating . It is used in boilers, tanks or chemical reactor. It has a good resistance to corrosion up to 800°C. This product is available in 0.47, 0.94, 3.7 and 18.5 litres. Best used with specific Duralco® 230-4 thinner in 0.44 litre.  Please contact us for bigger packagings. We also provide other types of   high temperature surface coating products.
Full description
Duralco® 254 HT Coating

Duralco® 254 HT Coating

Cotronics Duralco® 254 is a stainless stee l based coating. It is used in boilers, tanks or chemical reactors. It has a good resistance to corrosion up to 980°C. This product is available in 0.47, 0.94 and 3.7 litres. Please contact us for bigger packagings. We also provide other types of  high temperature surface coating  products.
Full description
Cotronics Duralco 4400 Adhesive epoxy high temperature

Duralco® 4400 Adhesive epoxy

Cotronics Duralco® 4400 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 200°C. This 2 components epoxy adhesive is charged with alumina powder, it is thermally conductive. This product is available in 0.47 and 3.7 litres.  Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Duralco® 4420 Adhesive epoxy

Duralco® 4420 Adhesive epoxy

Cotronics Duralco® 4420 adhesive is a bonding epoxy resin .  It is used to make high temperature bonding, up to 230°C. This single component epoxy adhesive is charged with alumina powder, it has a high viscosity. This product is available in 0.12, 0.33, 0.47 and 3.7 litres; Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Cotronics Duralco 4460 Adhesive epoxy high temperature

Duralco® 4460 Adhesive epoxy

Cotronics Duralco® 4460 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 315°C. This 2 components epoxy adhesive without charge is very fluid, it needs a heat curing. This product is available in 0.47, 1.8 and 11.1 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Duralco® 4461 Adhesive epoxy

Duralco® 4461 Adhesive epoxy

Cotronics Duralco® 4461 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 260°C This 2 components epoxy adhesive without charge is very fluid. This product is available in 0.47, 3.7 and 18.5 litres; Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Duralco® 4462 Adhesive epoxy

Duralco® 4462 Adhesive epoxy

Cotronics Duralco® 4462 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 220°C. This 2 components epoxy adhesive without charge is very fluid, completely transparent. This product is available in 0.47 and 3.7 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Duralco® 4463 Adhesive epoxy

Duralco® 4463 Adhesive epoxy

Cotronics Duralco® 4463 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 260°C. This single component epoxy adhesive charged with alumina has a very low thermal expansion. This product is available in 0.23, 0.47, 3.7 and 18.5 litres; Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Cotronics Duralco 4525 Adhesive epoxy high temperature

Duralco® 4525 Adhesive epoxy

Cotronics Duralco® 4525 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with alumina powder, easy to machine. This product is available in 0.47, 3.7 and 18.5 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Duralco® 4535 Adhesive epoxy

Duralco® 4535 Adhesive epoxy

Cotronics Duralco® 4535 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 230°C. This 2 components epoxy adhesive is charged with alumina powder and flexible. This product is available in 0.23, 1.8 and 18.5 litres.  Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Duralco® 4537 Adhesive epoxy

Duralco® 4537 Adhesive epoxy

Die Cotronics ® Produkte sind in Deutschland nicht verkauft ⚠ Cotronics Duralco® 4537 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 230°C. This 2 components epoxy adhesive is charged with alumina powder, it polymerises very quickly. This product is available in 0.12, 0.47 and 3.7 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Cotronics Duralco 4538 Adhesive epoxy high temperature

Duralco® 4538 Adhesive epoxy

Cotronics Duralco® 4538 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 235°C. The flexibility of this 2 components epoxy adhesive can be adapted according to your needs. This product is available in 0.47, 1.8 and 18.5 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Cotronics Duralco 4540 Adhesive epoxy high temperature

Duralco® 4540 Adhesive epoxy

Cotronics Duralco® 4540 adhesive is a bonding epoxy resin .  It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with aluminum powder, it is a good thermal conductor. This product is available in 0.47 and 3.7 litres.  Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Cotronics Duralco 4700 Adhesive epoxy high temperature

Duralco® 4700 Adhesive epoxy

Cotronics Duralco® 4700 adhesive is a bonding epoxy resin .  It is used to make high temperature bonding, up to 315°C. This 2 components epoxy adhesive is charged with alumina powder, it needs a heat curing. This product is available in 0.47, 3.7 and 18.5 litres. Please contact us for bigger packagings. We also provide other types of  high temperature adhesives and glues.
Full description
Cotronics Duralco 4703 Adhesive epoxy high temperature

Duralco® 4703 Adhesive epoxy

Cotronics Duralco® 4703 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 340°C. This 2 components epoxy adhesive is charged with alumina powder, it needs a heat curing. This product is available in 0.47, 3.7 and 18.5 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Duralco® NM25 Adhesive epoxy

Duralco® NM25 Adhesive epoxy

Cotronics Duralco® NM25 adhesive is a bonding epoxy resin .  It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with alumina powder. This resin is amagnetic. This product is available in 0.47 and 3.7 litres; Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Duralco® S5H13 Adhesive epoxy

Duralco® S5H13 Adhesive epoxy

Cotronics Duralco® S5H13 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with alumina powder. This resin is sterilisable. This product is available in 0.47 and 3.7 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Durapot 820 - Ceramic...

Durapot 820 - Ceramic embedding cement

Cotronics Durapot® 820 is a high purity ceramic embedding cement . This ceramic has an excellent electrical resistance at high temperatures. It is an air-drying paint that can withstand temperatures up to 1760°C and dries very quickly. Based on alumina, it is available in 0.94 and 3.7 litre packs.  For larger sizes, please contact us. We also offer other alumina -based products delivered in single-component form.
Full description
Durapot 821 - Ceramic...

Durapot 821 - Ceramic embedding cement

Cotronics Durapot® 821 is a high purity ceramic embedding cement . It is a fast drying, easy to use adhesive. It is an air-drying paint that is resistant up to 1370°C. It is used for bonding and coating quartz lamps, glassware, fibre cables or other low expansion materials. Based on quartz , it is available in 0.47 and 0.94 litre packs.  For larger sizes, please contact us.
Full description
Durapot®  801 Mouldable...

Durapot® 801 Mouldable Ceramic

Cotronics Durapot® 801 is a high purity bi component alumina ceramic cement . It has excellent electrical resistance at high temperatures. It is an alumina-based powder with a temperature resistance of up to 1840°C. It is available in 0.94 and 3.7 litres.  For larger sizes, please contact us. We also offer other alumina -based products for metallurgical and electrical applications.
Full description
Durapot® 804 Coating Ceramic

Durapot® 804 Coating Ceramic

Cotronics  Durapot® 804  is a high purity bi component alumina  ceramic cement . It has excellent  electrical resistance  at high temperatures. It is an alumina-based powder with a temperature resistance of up to 1650°C. It is available in 0.94 and 3.7 litres.  For larger sizes, please contact us. We also offer other  alumina -based products for metallurgical and electrical applications.
Full description
Durapot® 805 Alumina...

Durapot® 805 Alumina Embedding Ceramic

Cotronics  Durapot® 805  is a high purity bi component alumina  ceramic cement . It has excellent  electrical resistance  at high temperatures. It is an alumina-based powder with a temperature resistance of up to 1650°C. It is available in 0.94 and 3.7 litres.  For larger sizes, please contact us. We also offer other  alumina -based products for metallurgical and electrical applications.
Full description
DURAPOT® 808 two-component...

DURAPOT® 808 two-component embedding ceramic Powder

Cotronics  Durapot® 808  is a high purity bi component alumina  ceramic cement . It has excellent  electrical resistance  at high temperatures. It is an alumina-based powder with a temperature resistance of up to 1650°C. It is available in 0.94 and 3.7 litres.  For larger sizes, please contact us. We also offer other  alumina -based products for metallurgical and electrical applications.
Full description
Durapot® 809 Castable...

Durapot® 809 Castable ceramic cement

Cotronics Durapot® 809 is a high purity magnesia based coating and bonding ceramic cement. It has excellent dielectric properties. This cement resists up to 1530°C. This product is available in 0.94, 3.7 and 18.5 litres, for bigger packaging please contact us.
Full description
Durapot® 810 Castable...

Durapot® 810 Castable ceramic cement

Cotronics Durapot® 810 is a high purity coating ceramic cement . It has an excellent electrical resistance at high temperature. It is an alumina based powder which resists up to 1650°C. This product is available in 0.94, 3.7 and 18.5 litres, for bigger packaging please contact us.
Full description
Durapot® 814 Zirconia...

Durapot® 814 Zirconia Silicate Embedding Ceramic

Cotronics Durapot® 814 is a high purity ceramic embedding cement . This ceramic has an excellent electrical resistance at high temperatures. It is a zirconia-based powder that can withstand temperatures up to 1093°C and dries very quickly. It is available in 0.94 and 3.7 litres.  For larger sizes, please contact us. We also offer a range of  powders in different particle sizes for mass production applications.
Full description
Cotronics Durapot 861 epoxy moulding resin high temperature

Durapot® 861 moulding epoxy resin

Cotronics Durapot® 861 moulding resin is a very fluid  epoxy resin.   It is used to make high temperature moulding, up to 260°C. This product is available in 0.47, 3.7 and 18.5 litres. For bigger packaging please contact us, we also offer other moulding cement and resin .
Full description
Durapot® 862 moulding epoxy...

Durapot® 862 moulding epoxy resin

Cotronics Durapot® 862 moulding resin is an epoxy resin and  it needs a heat curing.  It is used to make high temperature moulding, up to 315°C. It has a low viscosity and is translucent. This product is available in 0.47, 3.7 and 18.5 litres, for bigger packaging please contact us.
Full description
Durapot® 863 moulding epoxy...

Durapot® 863 moulding epoxy resin

Cotronics Durapot® 863 moulding resin is an epoxy resin and  it needs a heat curing. It is used to make high temperature moulding, up to 315°C. It offers excellent dielectric properties and solvent resistance. This product is available in 0.47, 3.7 and 18.5 litres, for bigger packaging please contact us.
Full description
Durapot® 864 moulding epoxy...

Durapot® 864 moulding epoxy resin

Cotronics Durapot® 864 moulding resin is a flexible  epoxy resin.   It is used to make high temperature moulding, up to 230°C. This product is available in 0.47, 3.7 and 18.5 litres. For bigger packaging, please contact us. We also offer other moulding cement and resin .
Full description
Cotronics Durapot 865 epoxy moulding resin high temperature

Durapot® 865 moulding epoxy resin

Cotronics Durapot® 865 moulding resin is a thermally conductive epoxy resin.  It is used to make high temperature moulding, up to 260°C. This product is available in 0.47, 3.7 and 18.5 litres, for bigger packaging please contact us.
Full description
Durapot® 866 moulding epoxy...

Durapot® 866 moulding epoxy resin

Cotronics Durapot® 866 moulding resin is a thermally insulating epoxy resin .  It is used to make high temperature moulding, up to 260°C. This product is available in 0.47, 3.7 and 18.5 litres. For bigger packaging, please contact us. We also offer other  moulding cement and resin .
Full description
Durapot® 868 moulding epoxy...

Durapot® 868 moulding epoxy resin

Cotronics Durapot® 868 moulding resin is a flexible epoxy resin.  It is used to make high temperature moulding, up to 260°C. This product is available in 0.47 and 3.7 litres, for bigger packaging please contact us.
Full description
Duraseal® 1529 Waterproof...

Duraseal® 1529 Waterproof sealant

Cotronics Duraseal® 1529 is a  high temperature silicone based sealant. He resists to chemicals, usable up to 315°C and it is a good thermal insulator. This product is available in 0.47, 0.94 and 3.7 litres, for bigger packaging please contact us. For larger quantities, please contact us. We also offer a range of  high temperature sealant .  
Full description
Duraseal® 1529FS Waterproof...

Duraseal® 1529FS Waterproof sealant

Cotronics Duraseal® 1529FS is a high temperature catalyzed silicone based sealant . It is viscous, resists to chemicals, usable up to 480°C and it is a good thermal insulator. This product is available in 0.47, 0.94 and 3.7 litres. For larger quantities, please contact us. We also offer a range of high temperature sealant .  
Full description
Duraseal® 1529H Waterproof...

Duraseal® 1529H Waterproof sealant

Cotronics Duraseal® 1529H is a high temperature catalyzed silicone based sealant. It resists to chemicals, usable up to 400°C and it is a good thermal insulator. This product is available in 0.47, 0.94 and 3.7 litres, for bigger packaging please contact us.
Full description
Duraseal® 1533 HT Resin

Duraseal® 1533 HT Resin

Cotronics Duraseal® 1533 is a good  thermal insulator usable up to 290°C. It is used for high temperature bonding, moulding and coating. It resists to oils, hydrocarbon and water.  This product is available in 0.22, 0.23 et 1.8 litres, for bigger packaging please contact us. We also offer other   high temperature sealants .
Full description
Cotronics Duralco Adhesive epoxy high temperature in cartridge

Epox-Eez ETSK Epoxy kit

Cotronics Epox-Eez ETSK is a test kit for different HT epoxies . The kit contains 1 cartridges of each references 4525N, 4461N, 4537N and 4540N. To be used with the ETAG gun and the ETMT Syringes For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Epox-Eez™ 456 Epoxy putty

Epox-Eez™ 456 Epoxy putty

Cotronics Epox-Eez 456B is stainless steel based epoxy putty . It is used for automotive, electronic or chemical equipment repairing up to 260°C. It has excellent adhesion and a good resistance to chemicals. It resists to corrosion. This product is available in 0.03, 0.23 and 0.94 litres, for bigger packaging please contact us.  For larger sizes, please contact us. We also offer other  high temperature adhesives.  
Full description
Resbond® 3901 Ceramic adhesive

Resbond® 3901 Ceramic adhesive

Cotronics Resbond® 3901 adhesive is an alumina based bonding ceramic cement. It can also be used to harden fibrous materials like refractory boards or insulation blankets. Resbond® 3901 can be fluidified with the 3901A specific binder, never with water. Do not add more than 5% of binder to the cement . This product is available in 0.94 and 3.7 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 3901A Ceramic...

Resbond® 3901A Ceramic binder and hardener

Cotronics Resbond® 3901A alumina based binder is used to fluidify cement or harden fibrous materials. It can also be used to harden fibrous materials like refractory boards or insulation blankets. It is used to fluidify the Resbond® 3901 ceramic cement. Do not add more than 5% of binder to the cement . This product is available in 0.94, 3.7 and 18.5 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 507TS HT threadlocker

Resbond® 507TS HT threadlocker

Cotronics Resbond® 507TS is a HT threadlocker. It is used for general purpose. Can be used with all conventional chemicals and cures at room temperature. It resists up to 260°C. This product is available in a 100g kit. 
Full description
Resbond® 7030 Ceramic adhesive

Resbond® 7030 Ceramic adhesive

Cotronics Resbond® 7030 adhesive is a silica based bonding ceramic cement. It is used to make high temperature bonding, up to 950°C. This product is available in 0.94, 3.7 and 18.5 litres, for bigger packaging please contact us.
Full description
Cotronics Resbond 901 ceramic adhesive alumina high temperature

Resbond® 901 Adhesive

Cotronics Resbond® 901 adhesive is an alumina based bonding ceramic cemen t. It can also be used to harden fibrous materials like refractory boards or insulation blankets. Resbond® 901 can be fluidified with the 901A specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0.94, 3.7 and 18.5 litres, for bigger packaging please contact us.  We also offer other  high temperature adhesives based on alumina. 
Full description
RESBOND® 901...

RESBOND® 901 Single-component alumina ceramic adhesive

Cotronics Resbond® 901 adhesive is a one-component alumina-based ceramic bonding cement . It can also be used to form or harden the surface of fibrous products, such as refractory boards or insulation boards . Resbond® 901 alumina single component can be fluidised with a specific 901A adhesive instead of water. It is recommended that the binder added to the ceramic cement does not exceed 5%. It is available in 0.94, 3.7 and 18.5 litre packs, for larger packs please contact us. We also offer other high temperature adhesives based alumina. 
Full description
Cotronics Resbond 901A hardener for ceramic adhesive alumina high temperature

Resbond® 901A ceramic binder and hardener

Cotronics Resbond® 901A alumina based binder is used to fluidify cement or harden fibrous materials It can also be used to harden fibrous materials like refractory boards or insulation blankets. It is used to fluidify the Resbond® 901 ceramic cement . Do not add more than 5% of binder to the cement. This product is available in 0.94, 3.7 and 18.5 litres, for bigger packaging please contact us.  We also offer other  high temperature adhesives based on alumina. 
Full description
Resbond® 903 Ceramic adhesive

Resbond® 903 Ceramic adhesive

Cotronics Resbond® 903 Green  ceramic alumina based adhesive. It has a special high temperature formula up to 1650°C. It is a good thermal conductor which resists to thermal shocks. This product is available in 0.47 and 0.94 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Cotronics Resbond 903HP ceramic adhesive alumina high temperature

Resbond® 903HP ceramic adhesive

Cotronics Resbond® 903HP adhesive is an alumina based bonding ceramic cement . It is used to make high temperature bonding. This product needs a heat curing. Resbond® 903HP can be fluidified with the 903HP-3 specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0.47, 0.94 and 3.7 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 903HPT ceramic binder

Resbond® 903HPT ceramic binder

Cotronics Resbond® 903HPT alumina based binder is used to fluidify cement. It is used to fluidify the Resbond® 903HP ceramic cement. Do not add more than 5% of binder to the cement . This product is available in 0.47 and 0.94 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Cotronics Resbond 904 ceramic adhesive zirconia high temperature

Resbond® 904 ceramic adhesive

Cotronics Resbond® 904 adhesive is a zirconia based bonding ceramic cement . It is used to make high temperature bonding, up to 2200°C. Resbond® 904 can be fluidified with the 904-04 specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0.47 and 0.94 litres. For larger packages, please contact us. We also offer other high temperature zirconia adhesives .
Full description
Resbond® 904-04 ceramic binder

Resbond® 904-04 ceramic binder

Cotronics Resbond® 904-04 zirconia based binder is used to fluidify cement. It is used to fluidify the Resbond® 904 ceramic cement . Do not add more than 5% of binder to the cement. This product is available in 0.47 litre. For larger packages, please contact us. We also offer other high temperature zirconia adhesives .
Full description
Resbond® 905 ceramic adhesive

Resbond® 905 ceramic adhesive

Cotronics Resbond® 905 adhesive is a silica based bonding ceramic cement . It is used to make high temperature bonding, up to 1370°C. Resbond® 905 can be fluidified with the 905T specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0.47, 0.94 and 3.7 litres. For larger packages, please contact us. We also offer other high temperature silica adhesives .
Full description
Resbond® 905T ceramic binder

Resbond® 905T ceramic binder

Cotronics Resbond® 905T silica based binder is used to fluidify cement. It is used to fluidify the Resbond® 905 ceramic cement . Do not add more than 5% of binder to the cement. This product is available in 0.47 litre. For larger packages, please contact us. We also offer other high temperature silica adhesives .
Full description
Cotronics Resbond 906 adhesif ceramique magnesie haute temperature

Resbond® 906 ceramic adhesive

Cotronics Resbond® 906 adhesive is a magnesia based bonding ceramic cement . It is used to make high temperature bonding, up to 1650°C. Resbond® 906 can be fluidified with the 906T specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0.47, 0.94 and 3.7 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 906T ceramic binder

Resbond® 906T ceramic binder

Cotronics Resbond® 906T magnesia based binder is used to fluidify cement. It is used to fluidify the Resbond® 906 ceramic cement. Do not add more than 5% of binder to the cement. This product is available in 0.47 litre, for bigger packaging please contact us.
Full description
Resbond® 907 ceramic adhesive

Resbond® 907 ceramic adhesive

Cotronics Resbond® 907 adhesive is a mica based bonding ceramic cement . It is used to make high temperature bonding, up to 1260°C. This product is available in 0.23, 1.85 and 18.5 litres. For bigger packaging please contact us. We also offer other high temperature mica adhesives . 
Full description
Resbond® 907 single component

Resbond® 907 single component

Cotronics Resbond® 907 adhesive is a mica based bonding  ceramic cement . It is used to make high temperature bonding, up to 1260°C. This product is available in 0.23, 1.85 and 18.5 litres. For bigger packaging please contact us. We also offer other  high temperature mica adhesives . 
Full description
Resbond® 907GF ceramic...

Resbond® 907GF ceramic adhesive

Cotronics Resbond® 907GF adhesive 907GF is a mica based bonding ceramic cement . It is used to make high temperature bonding, up to 1650°C. This product is available in 0.23, 0.94 and 1.8 litres. For bigger packaging please contact us. We offer a variety of  high temperature mica adhesive products. 
Full description
Cotronics Resbond 907GF ceramic adhesive high temperature

Resbond® 907GF-6 ceramic adhesive

Cotronics Resbond® 907GF adhesive is a mica-based ceramic bonding cement . It is used for high temperature bonding up to 1650°C. The 907GF6 is packaged in ready-to-use cartridges. For larger sizes, please contact us. We offer a variety of  high temperature mica adhesive products. 
Full description
Resbond® 907TS...

Resbond® 907TS single-component threadlocker

Cotronics Resbond® 907TS is a HT threadlocker . Cotronics offers 4 different types in its range to suit different applications. They are chemically resistant and cure at room temperature. It is available in different colours:  907TS Green: Small screws, tight fit, very low clearance, instrumentation  907TS Blue: Medium screws, bolt, pipe threading  907TS Red: Large screws, piping, studs, bearings  907TS Gold: Difficult applications, flange, nut, pipe, bolt  Please contact us for more information. We also offer a full range of  high temperature surface coatings to meet your application needs.
Full description
Cotronics Resbond 907TS threadlocker high temperature

Resbond® 907TS-TK HT threadlocker

Cotronics Resbond® 907TS-TK is a kit with 4 bottles of HT threadlockers . Can be used with all conventional chemicals and cures at room temperature. This product is available in kit of 4 bottles of 28g (Green + Blue + Red + Gold). Please contact us for more information. We also offer a full range of  high temperature surface coatings for your application needs.
Full description
Resbond® 908 Bi-component...

Resbond® 908 Bi-component Alumina Powder

Cotronics Resbond® 908 adhesive is an alumina based bonding ceramic cement . It is used to make high temperature bonding, up to 1650°C. Resbond® 908 can be fluidified with the 908T specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0,47, 0.94 and 3,7 litres. For bigger packaging please contact us.  We also offer other high temperature alumina adhesives .
Full description
Cotronics Resbond 908 ceramic adhesive alumina high temperature

Resbond® 908 ceramic adhesive

Cotronics Resbond® 908 adhesive is an alumina based bonding ceramic cement. It is used to make high temperature bonding, up to 1650°C. Resbond® 908 can be fluidified with the 908T specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0,47, 0.94 and 3,7 litres, for bigger packaging please contact us.
Full description
Resbond® 908T ceramic binder

Resbond® 908T ceramic binder

Cotronics Resbond® 908T alumina based binder is used to fluidify cement. It is used to fluidify the Resbond® 908 ceramic cement. Do not add more than 5% of binder to the cement . This product is available in 0.47 litre. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 918 Silica ceramic...

Resbond® 918 Silica ceramic adhesive

Cotronics Resbond® 918 adhesive is a silica-based ceramic bonding cement . It is used for high temperature bonding up to 1370°C. Resbond® 918 can be thinned with the specific binder 918T-1, never with water. It is recommended not to add more than 5% binder to the ceramic cement. The adhesive is available in 0.94 and 3.7 litre packs. For larger sizes, please contact us. We also offer other high temperature silica adhesives .
Full description
Cotronics Resbond 919 ceramic adhesive magnesia high temperature

Resbond® 919 ceramic adhesive

Cotronics Resbond® 919 adhesive is a magnesia based bonding ceramic cement . It is used to make high temperature bonding, up to 1530°C. Resbond® 919 can be fluidified with demineralized water. Do not add more than 5% of binder to the cement. This product is available in 0.94, 3.7 and 18.5 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Cotronics Resbond 920 ceramic adhesive alumina high temperature

Resbond® 920 ceramic adhesive

Cotronics Resbond® 920 adhesive is an alumina based bonding ceramic cement . It is used to make high temperature bonding, up to 1600°C. Resbond® 920 can be fluidified with demineralized water. Do not add more than 5% of binder to the cement. This product is available in 0.94, 3.7 and 18.5 litres. For bigger sizes, please contact us. We offer other high temperature alumina adhesives . 
Full description
Cotronics Resbond 931 graphite adhesive high temperature

Resbond® 931 graphite adhesive

Cotronics Resbond® 931 adhesive is a 100% graphite based bonding ceramic cement. It is used to make high temperature bonding between 2 parts of graphite, up to 3000°C under a vacuum. Resbond® 931 can be fluidified with the 931-4 specific binder, never with water. Do not add more than 5% of binder to the cement . This product is available in 0.47, 0.94 and 3.7 litres. For larger packages, please contact us. We also offer other high temperature graphite adhesives . 
Full description
Resbond® 931 Graphite binder

Resbond® 931 Graphite binder

Cotronics Resbond® 931 graphite based binder is used to fluidify cement. It is used to fluidify the Resbond® 931 ceramic cement. Do not add more than 5% of binder to the cement. This product is available in 0.47 and 0.94 litres. For larger packages, please contact us. We also offer other high temperature graphite adhesives . 
Full description
Resbond® 931C Graphite...

Resbond® 931C Graphite adhesive

Cotronics Resbond® 931C adhesive is a bonding graphite / ceramic cement . It is used to make high temperature bonding between graphite and ceramic, up to 1370°C. Resbond® 931C can be fluidified with the 931C-3 specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0.47, 0.94 and 3.7 litres. For larger packages, please contact us. We also offer other high temperature graphite adhesive s. 
Full description
Resbond® 931C Graphite binder

Resbond® 931C Graphite binder

Cotronics Resbond® 931C graphite based binder is used to fluidify cement. It is used to fluidify the Resbond® 931C ceramic cement. Do not add more than 5% of binder to the cement. This product is available in 0,47 litre. For larger packages, please contact us. We also offer other high temperature graphite adhesives . 
Full description
Cotronics Resbond 940 ceramic adhesive zirconia high temperature

Resbond® 940 Ceramic adhesive

Cotronics Resbond® 940 adhesive is a zirconia based bonding ceramic cement . It is used to make high temperature bonding, up to 1093°C. Resbond® 940 can be fluidified with the 940-3 specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0.94 and 3.7 litres. For larger packages, please contact us. We also offer other high temperature graphite adhesives .
Full description
Resbond® 940 Ceramic binder

Resbond® 940 Ceramic binder

Cotronics Resbond® 940 zirconia based binder is used to fluidify cement. It is used to fluidify the Resbond® 940 ceramic cement. Do not add more than 5% of binder to the cement . This product is available in 0.47 litre. For larger packages, please contact us. We also offer other high temperature zirconia adhesives .
Full description
Resbond® 940HE ceramic...

Resbond® 940HE ceramic adhesive

Cotronics Resbond® 940HE adhesive is a silica based bonding ceramic cement . It is used to make high temperature bonding, up to 980°C. This product is available in 0.47, 0.94 and 3.7 litres. For larger packages, please contact us. We also offer other high temperature silica adhesives .
Full description
Resbond® 940HT ceramic...

Resbond® 940HT ceramic adhesive

Cotronics Resbond® 940HT adhesive is an alumina based bonding ceramic cement . It is used to make high temperature bonding, up to 1540°C. This product is available in 0.47, 0.94 and 3.7 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 940LE Ceramic...

Resbond® 940LE Ceramic adhesive

Cotronics Resbond® 940LE adhesive is a silica based bonding ceramic cement . It is used to make high temperature bonding, up to 1370°C. This product is available in 0.47, 0.94 and 3.7 litres. For larger packages, please contact us. We also offer other high temperature silica adhesives .
Full description
Resbond® 940SS Ceramic...

Resbond® 940SS Ceramic adhesive

Cotronics Resbond® 940SS adhesive is a stainless steel based bonding ceramic cement . It is used to make high temperature bonding, up to 1100°C. It is an electrical conductor. This product is available in 0.47, 0.94 and 3.7 litres, for bigger packaging please contact us. 
Full description
Resbond® 940SS...

Resbond® 940SS Single-component adhesive binder

Cotronics Resbond® 940SST binder filled with stainless steel is used as a fluidizer. It is used to fluidise Resbond® 940SS . It is recommended not to add more than 5% binder to the ceramic cement . It is available in 0.45 litre packs. For larger packs, please contact us. 
Full description
Resbond® 950 Ceramic adhesive

Resbond® 950 Ceramic adhesive

Cotronics Resbond® 950 adhesive is an aluminum based bonding ceramic cement . It is used to make high temperature bonding, up to 650°C. This product is available in 0.47, 0.94 and 3.7 litres, for bigger packaging please contact us. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 950FS Ceramic...

Resbond® 950FS Ceramic adhesive

Cotronics Resbond® 950FS is a bonding ceramic aluminum based cement . It is used for high temperature bonding up to 650°C. It has an accelerated drying. This product is available in 0.47 and 0.94 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 950T Ceramic binder

Resbond® 950T Ceramic binder

Cotronics Resbond® 950T alumina based binder is used to fluidify cement. It is used to fluidify the Resbond® 950 ceramic cement. Do not add more than 5% of binder to the cement . This product is available in 0.47 litre, for bigger packaging please contact us. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 952 Ceramic adhesive

Resbond® 952 Ceramic adhesive

Cotronics Resbond® 952 adhesive is a nickel based bonding ceramic cement . It is used to make high temperature bonding, up to 1093°C. This product is available in 0.47, 0.94 and 3.7 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
RESBOND® 952FS Filled...

RESBOND® 952FS Filled Nickel Two-component Powder

Cotronics Resbond® 952FS adhesive is a nickel-based ceramic bonding cement . It is used for high temperature bonding up to 1093°C. It is a two-component adhesive: 250 g powder in 0.23 L. For larger quantities, please contact us. We also offer other high temperature alumina adhesives . 
Full description
Resbond® 952T Ceramic binder

Resbond® 952T Ceramic binder

Cotronics Resbond® 952T alumina based binder is used to fluidify cement. It is used to fluidify the Resbond® 952 ceramic cement. Do not add more than 5% of binder to the cement . This product is available in 0.47 litre, for bigger packaging, please contact us. We offer other high temperature adhesives based on alumina . 
Full description
Resbond® 954 Ceramic adhesive

Resbond® 954 Ceramic adhesive

Cotronics Resbond® 954 adhesive is a stainless steel based bonding ceramic cement . It is used to make high temperature bonding, up to 1093°C. This product is available in 0.47, 0.94 and 3.7 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 954FS Ceramic...

Resbond® 954FS Ceramic adhesive

Cotronics Resbond® 954FS is a  bonding ceramic stainless steel based cement. It is used for high temperature bonding up to 1100°C. It has an accelerated drying. This product is available in 0.47, 0.94 and 3.7 litres, for bigger packaging please contact us. We offer two-component steel-filled high temperature powder adhesives . 
Full description
Resbond® 954T Ceramic binder

Resbond® 954T Ceramic binder

Cotronics Resbond® 954T alumina based binder is used to fluidify cement. It is used to fluidify the Resbond® 954 ceramic cement . Do not add more than 5% of binder to the cement. This product is available in 0.47 litre. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Resbond® 970N adhesives kit

Resbond® 970N adhesives kit

Cotronics Resbond® 970N is a kit of 7 high temperature adhesives . A single preparation and selection kit of ceramique adhesive ideal for your application. This sample kit is an authentic test and study laboratory. The kit will allow you to test and to validate different bonding solutions. For more information, please contact us. We also offer other high temperatur ceramic adhesive . 
Full description
Cotronics Resbond 989 ceramic adhesive alumina high temperature

Resbond® 989 Ceramic adhesive

Cotronics Resbond® 989 adhesive is an alumina based bonding ceramic cement . It is used to make high temperature bonding, up to 1650°C. Resbond® 989 can be fluidified with the 989T specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0.94, 3.7 and 18.5 litres. For larger sizes, please contact us. We also offer other high temperature adhesives .  
Full description
Resbond® 989F Ceramic adhesive

Resbond® 989F Ceramic adhesive

Cotronics Resbond® 989F adhesive is an alumina based bonding ceramic cement . It is used to make high temperature bonding, up to 1650°C. Resbond® 989F can be fluidified with the 989TF specific binder, never with water. Do not add more than 5% of binder to the cement. This product is available in 0.47 and 0.94 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Cotronics Resbond 989FS ceramic adhesive alumina high temperature

Resbond® 989FS Ceramic adhesive

Cotronics Resbond® 989FS adhesive is an alumina based bonding ceramic cement. It is used to make high temperature bonding, up to 1650°C. Resbond® 989FS can be fluidified with the 989TF specific binder, never with water. Do not add more than 5% of binder to the cement . This product is available in 0.47, 0.94 and 3.7 litres. For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Cotronics Resbond 989T ceramic binder alumina

Resbond® 989T Ceramic binder

Cotronics Resbond® 989T alumina based binder is used to fluidify cement. It is used to fluidify the Resbond® 989 ceramic cement. Do not add more than 5% of binder to the cement . This product is available in 0.47 and 3.7 litres. For larger sizes, please contact us. We also offer other high temperature adhesives .
Full description
Resbond® 989TF Ceramic binder

Resbond® 989TF Ceramic binder

Cotronics Resbond® 989TF alumina based binder is used to fluidify cement. It is used to fluidify the Resbond® 989F and 989FS ceramic cement. Do not add more than 5% of binder to the cement . This product is available in 0.47 and 3.7 litres.    For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Rescor 740 - Moldable...

Rescor 740 - Moldable Ceramic, Foam Insulation

Cotronics Rescor® 740 is a  ceramic moulding cement for high temperature applications. It is a lightweight, low density but very strong insulating foam.  It is an  alumina silicate based cement that is resistant up to 1260°C and can be diluted with water. It is available in 3.7 and 18.5 litre packs.  For larger sizes, please contact us.
Full description
Rescor 750 - Moldable...

Rescor 750 - Moldable Ceramic, Fused Silica

Cotronics Rescor® 750 is a  ceramic casting cement for high temperature applications.  The product has excellent electrical and mechanical properties and very good thermal stability. It is a liquid  silicate cement with a temperature resistance of up to 1480°C. It is not very dilatable and does not conduct heat well. It is available in 18.5 and 37 litre pots.  For larger sizes, please contact us.
Full description
Rescor 760 - Moldable...

Rescor 760 - Moldable Ceramic, Zirconium Oxide

Cotronics Rescor® 760 is a ceramic moulding cement  for high temperature applications.  The product has excellent electrical and mechanical properties and very good thermal stability. It is a liquid  zirconia based cement with a temperature resistance of up to 2200 °C.  This means that it has the highest temperature resistance of our entire range.  It is available in 7.5 litre buckets.  For larger quantities, please contact us.
Full description
Rescor 770 - Moldable...

Rescor 770 - Moldable Ceramic, Silicon Carbide

Cotronics Rescor® 770 i s a ceramic casting cement with excellent oxidation and erosion resistance. It is a silicon carbide based cement with a temperature resistance of up to 1480°C.  This material is ideal for casting and moulding molten metals, etc. It is available in 18,5 and 37 litres. For larger quantities, please contact us.
Full description
Rescor 780 - Moldable...

Rescor 780 - Moldable Ceramic, Liquid Alumina

Cotronics Rescor® 780 is a  ceramic casting cement with excellent oxidation and erosion resistance. It is an  aluminium oxide based cement with a temperature resistance of up to 1650°C.  This material is an excellent electrical insulator that can withstand very high temperatures. It is also a universal cement, recommended for all types of applications. It is available in 18.5 and 37 litres.  For larger quantities, please contact us.
Full description
Rescor® 310M Machinable...

Rescor® 310M Machinable ceramic

Cotronics Rescor® 310M is a  machinable ceramic block. It has a very low thermal expansion and conductivity. It is resistant to severe thermal shock up to 1650°C. It is composed of fused Silica Ceramic. This product is available in 110 x 150 x 220mm, 110 x 230 x 300mm and 110 x 300 x 450mm. Final Advanced Materials offers  machinable porous silica that can meet your application requirements.
Full description
Rescor® 3360M Ultra HT...

Rescor® 3360M Ultra HT moulding ceramic

Cotronics Rescor® 3360M is a moulding and machining ceramic. It has a low thermal conductivity and resists to thermal shocks up to 1650°C. This product is available in 0.47, 0.94 and 3.7 litres, for bigger packaging please contact us. Final Advanced Materials offers other products that can meet the requirements of your application: Ultra light  ceramic board  1200°C  360M  moldable ceramic  based on alumina fibre and inorganic hardener binder 
Full description
Rescor® 360M Ceramic putty

Rescor® 360M Ceramic putty

Cotronics Rescor® 360M is a moulding and machining ceramic. It has a low thermal conductivity and resists to thermal shocks up to 1260°C. This product is available in 0.94, 3.7 and 18.5 litres, for bigger packaging please contact us. Final Advanced Materials offers other products that can meet the requirements of your application: Ultra light ceramic board 1200°C  360M  moldable ceramic  based on alumina fibre and inorganic hardener binder 
Full description
RTC-60 fine alumina...

RTC-60 fine alumina mouldable ceramic

RTC-60 fine is a pure alumina based powder Al2O3. It can withstand temperatures up to 1790 °C. It can be mixed with demineralised water. The mixture results in a moulding paste which must be shaped and dried. This paste can be poured onto all non-absorbent materials. The moulds should have sufficient vents to allow proper casting.  RTC-60 is available in different grain sizes and in 4.5 kg.  For larger sizes, please contact us. We offer other  moulding ceramics with unlimited applications at high temperatures. 
Full description
RTC-70-1 Two-component...

RTC-70-1 Two-component Mouldable Ceramic Powder

RTC-70 fine is a  pure alumina based powder Al2O3. It can withstand temperatures up to 1790 °C. It can be mixed with demineralised water. The mixture results in a moulding paste which must be shaped and dried. This paste can be poured onto all non-absorbent materials. The moulds should have sufficient vents to allow proper casting.  RTC-70 mouldable ceramic is available in 3.6 kg.  For larger sizes, please contact us. We offer other  moulding ceramics with unlimited applications at high temperatures. 
Full description