High Temperature Epoxy Resin

High temperature epoxy resin application.

Cotronics® unique cross linked, organic-inorganic, polymer systems have excellent adhesion, high temperature stability, dielectric properties and superior chemical, corrosion and moisture resistance.

Duralco® Epoxies offer high bond strength, high temperature stability, low moisture absorption and low shrinkage. They are 100% solid systems. User friendly. No volatiles. Low odour. No VOC’s.

Specific applications Epoxy Resin

200°C - DURALCO® 4400

Use Duralco® 4400 for high strength, thermally conductive and electrically resistant bonds. Cures at room temperature without any objectionable odours. 4400 provides the thermal shock resistance and flexibility required to accommodate differences in thermal expansion which occurs during high heat flows. Duralco® 4400’s unique combination of bond strength and thermal conductivity proved to be successful in this severe environment.

230°C - DURALCO® 4420

Duralco® 4420 is ceramic filled and offers excellent electrical properties. No measuring, mixing or mess. Just apply and heat cure. Adheres to ceramics, glass, metals, plastics, mica, bond dissimilar materials, etc. and has excellent resistance to solvents, fuels, lubricants and most common chemicals. Provides the low moisture absorption required for many electronic applications.

Low Viscosity Epoxy Resin

315°C - DURALCO® 4460

Duralco® 4460 low viscosity, liquid adhesive forms ultra-thin bond lines and is ideal for impregnating, coating and encapsulating. 4460 has the chemical, electrical and radiation resistance that is often required in the most critical applications. This Unique Polymer System can be used up to 315°C after a heat cure at moderate temperatures.

260°C - DURALCO® 4461

Duralco® 4461 is a free flowing, liquid adhesive that is ideal for forming ultra-thin bond lines, impregnating, coating and encapsulating applications. Has excellent adhesion to metals, plastics, ceramics, glass, etc. Cures at room temperature to provide chemical, solvent and corrosion resistance in any high temp. application. Can be used up to 260°C as a protective coating for coils, filament windings, electronics, etc. It is an ideal choice for high temperature applications in electronics, optics, instrumentation, etc.

High Temperature
Epoxy Resin

Low thermal expansion Epoxy Resin

260°C - DURALCO® 4463

Duralco® 4563 is a low expansion, 260°C, room temperature curing adhesive and potting compound. Bonds to most glass, ceramics, metals, plastics, etc. Use this unique system for high performance bonding and encapsulation applications. Low expansion is a must in many electronic, optical and fiberoptic applications. 4463 offers strength, high temperature stability, thermal shock resistance, chemical resistance and low shrinkage.

General Use Epoxy Resin

260°C - DURALCO® 4525

Duralco® 4525 cures at room temperature, or in 5 minutes at 120°C, to provide high bond strength, high temp. stability, low shrinkage, excellent chemical, electrical and radiation resistance and low moisture absorption. It maintains its high electrical resistance over long periods of time and has the lowest moisture absorption available when compared to 23 commercially available epoxies. (This application has been approved by UL). 4525 is ideal for high performance bonding, potting, sealing, repairs, castings and jigs. Forms protective coatings. Commonly found in electronics, appliances, instrumentation, motors, equipment, etc

Vibration-resistant Epoxy Resin

230°C - DURALCO® 4535

Duralco® 4535 is a 2-component epoxy adhesive with high colloidal strength, mechanically resistant, which polymerize at room temperature in 24 hours. 4535 is resistant to thermal shock and peeling. Its good flexibility, its low shrinkage and its excellent dielectric coefficient, open a wide range of applications, especially in all systems subjected to vibrations.

230°C - DURALCO® 4537

Cotronics®' High Performance, High Temperature Epoxies are available in easy to use Epox-Eez® "Twin Pack Cartridges". Just place the twin pack cartridge into the convenient, applicator gun, snap on a mixer tube and squeeze to apply. The completely measured and fully mixed Duralco® 4537 will cure at room temperature to provide up to 230°C service. No more time-consuming weighing and measuring. Ideal for use in any high temperature application.

Flexible Epoxy Resin

235°C - DURALCO® 4538

Now, unlike ever before, there is a solution for applications requiring the ultimate in thermal shock and vibration resistance, sound absorption and excellent adhesion to dissimilar substrates.

Duralco® 4538 offers the flexibility of silicones and the chemical stability of epoxies. This completely variable system can be tailored to meet any application requirement just by varying the mix ratio of resin to hardener resulting in the exact degree of flexibility required for any application.

It’s easy to use. Just dispense resin and hardener, mix to a uniform colour and apply. Adheres to most plastics, metals, ceramics, glass, rubber and even Teflon™ (treated). Cures at room temp. for use from - 70°C to 230°C and will not soften or gum up at high temperatures. 4538 offers excellent chemical resistance and high bond and peel strength. It is ideal for all electric and electronics applications and can be used with most common chemicals and solvents.

Duralco® 4538 's convenient room temperature cure and superior high temperature performance makes it easy to use in any prototype or production application.

Machinable Epoxy Resin

260°C - DURALCO® 4540

Duralco® 4540 is filled with ultra-fine, aluminium metal powder creating a pourable liquid that easily penetrates fine openings, fills gaps and voids, seals, patches and repairs. Just mix, apply and cure at room temperature for outstanding adhesion, ductility, thermal conductivity and shock resistance. 4540 is machinable and rugged. It is resistant to chemicals and solvents and can be used to 260°C.

340°C - DURALCO® 4703

Duralco® 4703 is a composite of Cotronics®' unique high temperature resins, metallic and ceramic particles. It offers the ultimate stability and strength in high temperature environments. 4703 has excellent resistance to most chemicals, solvents, acids and bases and is easily machined to close tolerances. Applications include repairing and rebuilding worn or cracked composites, dies, fixtures, jigs, etc.

4703 is ideal for use as a high temp. adhesive for bonding, potting, injection molding, matched dies, vacuum forming dies, extrusion dies and tooling.

Very high temperature Epoxy Resin

Very high temperature

Duralco® 4700's unique properties stem from Cotronics®’ cross linked, inorganic - organic polymer system which, upon curing, forms an exceptionally durable epoxy for use to 315°C. User friendly. No volatiles. No solvents. No out gassing. Simply mix the liquid resin and liquid hardener and follow with a heat cure at 120°C (minimum). 4700 has excellent adhesion to metals, glass, ceramics, most plastics, etc. It is a superior adhesive that has high electrical resistance, low moisture absorption, high temperature stability, high bond strength, low shrinkage and excellent chemical, solvent and radiation resistance.

4700 is ideal for sealing electrical connections and is commonly used for high performance bonding, potting and repairing applications in electrical, electronic, automotive, aerospace, nuclear, chemical, production and laboratory applications.

Antimagnetic Epoxy Resin

260°C - DURALCO® NM25

Duralco® NM25 is an adhesive proven for bonding magnets while withstanding the high temperatures encountered in high performance applications. It is free of magnetic particles or conductive fillers which would interfere with magnetic fields when in use. Just mix and apply. NM25 cures at room temperature to provide excellent chemical solvent and moisture resistance. Will form thin bond lines and is ideal for use in applications with minimum clearance. NM25 has a medium viscosity and can form thin bond lines NM25 HV is a non-sag, putty.

Sterilizable Epoxy Resin

260°C - RESBOND® S5H13

Resbond® S5H13 is a unique epoxy that after a simple room temperature cure can assemble, bond and insulate stainless steel, metals, glass and ceramic components for use up to 260°C. Specially formulated to resist the severe conditions that are encountered during repeated hot sterilization as required for various medical applications. It is resistant to most common chemicals and solvents.

S5H13 is commonly used for high performance bonding, assembling, potting, sealing, coatings and repairs in instruments, devices, equipment, etc.

Contact us

Cotronics® - Epoxy Resins E (684.68k)

Technical data sheet: Cotronics® Epoxy Resins.


Cotronics Duralco 4400 Adhesive epoxy high temperature

Duralco® 4400 Adhesive epoxy

Cotronics Duralco ® 4400 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 200°C. This 2 components epoxy adhesive is charged with alumina powder, it is thermally conductive. This product is available in 0.47 and 3.7 litres.  Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Image générique

Duralco® 4420 Adhesive epoxy

Cotronics Duralco ® 4420 adhesive is a bonding epoxy resin .  It is used to make high temperature bonding, up to 230°C. This single component epoxy adhesive is charged with alumina powder, it has a high viscosity. This product is available in 0.12, 0.33, 0.47 and 3.7 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Cotronics Duralco 4460 Adhesive epoxy high temperature

Duralco® 4460 Adhesive epoxy

Cotronics Duralco ® 4460 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 315°C. This 2 components epoxy adhesive without charge is very fluid, it needs a heat curing. This product is available in 0.47, 1.8 and 11.1 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Image générique

Duralco® 4463 Adhesive epoxy

Cotronics Duralco ® 4463 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 260°C. This single component epoxy adhesive charged with alumina has a very low thermal expansion. This product is available in 0.23, 0.47, 3.7 and 18.5 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Cotronics Duralco 4525 Adhesive epoxy high temperature

Duralco® 4525 Adhesive epoxy

Cotronics Duralco ® 4525 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with alumina powder, easy to machine. This product is available in 0.47, 3.7 and 18.5 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Image générique

Duralco® 4535 Adhesive epoxy

Cotronics Duralco ® 4535 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 230°C. This 2 components epoxy adhesive is charged with alumina powder and flexible. This product is available in 0.23, 1.8 and 18.5 litres.  Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Cotronics Duralco 4538 Adhesive epoxy high temperature

Duralco® 4538 Adhesive epoxy

Cotronics Duralco ® 4538 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 235°C. The flexibility of this 2 components epoxy adhesive can be adapted according to your needs. This product is available in 0.47, 1.8 and 18.5 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Cotronics Duralco 4540 Adhesive epoxy high temperature

Duralco® 4540 Adhesive epoxy

Cotronics Duralco ® 4540 adhesive is a bonding epoxy resin .  It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with aluminum powder, it is a good thermal conductor. This product is available in 0.47 and 3.7 litres.  Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Cotronics Duralco 4700 Adhesive epoxy high temperature

Duralco® 4700 Adhesive epoxy

Cotronics Duralco ® 4700 adhesive is a bonding epoxy resin .  It is used to make high temperature bonding, up to 315°C. This 2 components epoxy adhesive is charged with alumina powder, it needs a heat curing. This product is available in 0.47, 3.7 and 18.5 litres. Please contact us for bigger packagings. We also provide other types of  high temperature adhesives and glues.
Full description
Cotronics Duralco 4703 Adhesive epoxy high temperature

Duralco® 4703 Adhesive epoxy

Cotronics Duralco ® 4703 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 340°C. This 2 components epoxy adhesive is charged with alumina powder, it needs a heat curing. This product is available in 0.47, 3.7 and 18.5 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Image générique

Duralco® NM25 Adhesive epoxy

Cotronics Duralco ® NM25 adhesive is a bonding epoxy resin .  It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with alumina powder. This resin is amagnetic. This product is available in 0.47 and 3.7 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Image générique

Duralco® S5H13 Adhesive epoxy

Cotronics Duralco ® S5H13 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with alumina powder. This resin is sterilisable. This product is available in 0.47 and 3.7 litres. Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description
Image générique

Epox-Eez™ 456 Epoxy putty

Cotronics Epox-Eez 456B is a stainless steel based epoxy putty . It is used for automotive, electronic or chemical equipment repairing up to 260°C. It has excellent adhesion and a good resistance to chemicals. It resists to corrosion. This product is available in 0.03, 0.23 and 0.94 litres, for bigger packaging please contact us.  For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Image générique

Bond-IT™ 7056AL Machinable epoxy

Cotronics Bond-IT 7056AL is a machinable repair epoxy. It cures at room temperature. It has excellent adhesion to metals, plastics, ceramics… It resists up to 230°C. This product is available in 0.05 and 0.22 litres. For bigger packaging please contact us. 
Full description
Cotronics Duralco Adhesive epoxy high temperature in cartridge

Epox-Eez ETSK Epoxy kit

Cotronics Epox-Eez ETSK is a test kit for different HT epoxies . The kit contains 1 cartridges of each references 4525N, 4461N, 4537N and 4540N. To be used with the ETAG gun and the ETMT Syringes For larger sizes, please contact us. We also offer other high temperature adhesives . 
Full description
Image générique

Bond-IT 007 HT adhesive

Cotronics Bond-IT 007 is a HT adhesive. It has excellent adhesion to metals, ceramics, glass and plastics. It is the best adhesive for attaching difficult assemblies up to 230°C. This product is available in 0.028 and 0.23 litres. For bigger packaging please contact us.
Full description
Duralco® 4461 two-component epoxy

Duralco® 4461 Adhesive epoxy

Cotronics Duralco ® 4461 adhesive is a bonding epoxy resin . It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive without charge is very fluid. This product is available in 0.47, 3.7 and 18.5 litres.  Please contact us for bigger packagings. We also provide other types of high temperature adhesives and glues .
Full description