High temperature Ceramic Adhesive Applications
Die Cotronics® Produkte sind in Deutschland nicht verkauft ⚠
Resbond® Ceramic Adhesives are based on high purity, ceramic binders and selected reinforcing fillers. They were designed to satisfy the most difficult, high temp. application requirements. These adhesives have excellent adhesion to ceramics, metals, glass and plastics and offer excellent high temp. stability, dielectric strength, mechanical properties and thermal shock resistance. They are resistant to molten metals, oxidizing and reducing atmospheres, most chemicals and solvents.
Just mix and cure at room temp. No objectionable odours, VOCs' or outgassing. Resbond® adhesives are available in a wide range of temperature capabilities, viscosities, strengths, expansion rates, conductivities, and dielectric strengths.
They are the ideal choice for research, electronics, metallurgical, nuclear and industrial applications. They are easily cured at room temperature without objectionable odours, VOCs' or outgassing.
High Temperature Ceramic Adhesive Applications
Bond Ceramic to ceramics, metals, or glass for high temp. structural bonds.
Impregnate Insulator parts for electrical components, appliances, heaters, etc.
Coat Metals, ceramics, glass, cloths, windings, etc.
Electronics Encapsulation, resistors, high intensity lamps, fiber optics.
Equipment Bonding door gaskets, thermocouples, furnace parts, feed thrust, vacuum equipment, seals, etc.
Appliances Seals thermocouples, bonds heating elements, etc.
Instrumentation Bonds and coats coil forms, fiber optics, strain gauges, etc.
Production Light bulbs, gas ignitors, automotive sensors, end seals, catheters, thread locking, etc.
Alumina Ceramic Adhesives
1650°C - Resbond® 901
Resbond® 901 Ceramic Fiber Adhesive and Coating is a high purity, Alumina Oxide based, Ceramic Composite that combines the refractory properties of Alumina with ceramic fiber reinforcement.
1790°C - Resbond® 903HP
Resbond® 903HP is an ultra-high temperature, Alumina Adhesive. Developed for high strength bonding of any combination of dense non-porous ceramics, glass and or non-reactive metals. 903HP is a smooth, creamy paste that can be brushed, trowelled or sprayed on.
1650°C - Resbond® 908
Resbond® 908 has excellent electrical resistance, moisture resistance and thermal conductivity. It will become water insoluble after use (or post cure) at temperatures of 120°C - 150°C.
1650°C - Resbond® 920
Resbond® 920 offers both high thermal conductivity and superior electrical resistance. It is based on conductive Alumina ceramic and should be used whenever rapid dissipation of heat is required. 920 has a dielectric strength of 270 V/mm, volume resistivity of 1010 Ω.cm (at room temperature) and a thermal conductivity of 2.16 W/m.K.
1650°C - Resbond® 989
Resbond® 989 is a one component high purity, 1650°C Alumina based, general purpose adhesive. It has a smooth creamy consistency and cures at room temperature to form strong bonds to ceramics, graphite, metals and glass.
1650°C - Resbond® 989F
The Alumina used to formulate Resbond® 989F particle size has been reduced to 0.6µm. 989F combines this ultra-fine Alumina with special high temperature colloidal ceramic binders to create an adhesive ideal for a new generation of applications.
1650°C - Resbond® 989FS
Resbond® 989 Fast Set is specially formulated for applications requiring a fast setting, single component, alumina adhesive. Now, a free-flowing formulation that is ideal for use in automatic dispensing equipment. It is precisely dispensed through fine needles without clogging or mess. 989FS cures at room temperature or in 5 minutes at 93°C. It is the ideal choice for high speed production applications where automation is required.
1540°C - Resbond® 940HT
Resbond® 940 High Temperature is a specially formulated, ultra-high temperature Alumina adhesive that can be used continuously to 1540°C. Resistant to liquid metals, most chemicals and solvents, oxidizing and reducing atmospheres.
Zirconia Ceramic Adhesives
2200°C - Resbond® 904
Resbond® 904 extreme temperature Zirconia based adhesive surpasses the capabilities of most materials to provide 2200°C service. 904 is a smooth, creamy paste that is easily applied and air dried to form a hard surface. Resistant to molten metals, most chemicals and solvents, oxidizing and reducing atmospheres. It is ideal for bonding and forming electrical, oxidation erosion and liquid metal resistant coatings for ceramics, graphite and thermocouple tubes.
1090°C - Resbond® 940
Resbond® 940 Standard has excellent adhesion to ceramics, glass, metals, etc. Offers excellent electrical, chemical and thermal shock resistance.
Mica Ceramic Adhesive
1260°C - Resbond® 907
Resbond® 907 is a single component ceramic composite based on Mica platelets and proprietary ceramic binders. 907, all-purpose adhesive offers high bond strength, solvent and electrical resistance. Safe to use. No objectionable or toxic odours. Use from -180°C to 1260°C.
1287°C - Resbond® 907GF
Resbond® 907GF Fireproof Adhesive and Sealant is a moist, creamy putty for use from -180°C to 1287°C. It is easily applied from standard caulking cartridges and air dries in 4 - 12 hours at room temperature.
Silica Ceramic Adhesives
1370°C - Resbond® 905
Resbond® 905 Quartz (fused silica) Adhesive was specially formulated for bonding low expansion and thermal shock resistant ceramics. The thermal expansion of 905 closely matches the extremely low expansion of Quartz, Fused Silica, Cordierite and Lithium-Alumina Ceramics. These shock resistant ceramics can now be successfully bonded and used to 1370°C.
1370°C - Resbond® 940LE
Resbond® 940LE is a low expansion, Quartz based, fast curing adhesive. The perfect adhesive for bonding and potting Quartz Lamps, Glassware, Fiber Cables or any other low expansion materials. 940LE bonded high performance, halogen light bulbs in a high speed, high precision production line.
980°C - Resbond® 940HE
Resbond® 940HE is a silica filled adhesive for bonding and encapsulating high expansion materials.
980°C - Thermeez® 7030
Thermeez® 7030 High Expansion Adhesive Bonds and Protects to 980°C. Asbestos free and safe to use. No objectionable odours or harmful fibers. Just mix to a smooth, creamy paste and apply. Thermeez will cure in 24 hours at room temperature or in 4 hours at 65°C. Can be applied to most metals, ceramics, door gaskets, tadpole gaskets and ceramic cloths and has excellent adhesion to steel, stainless, aluminium, lead and ceramics. 7030 is fireproof and has resistance to most acids, alkalies, solvents, corrosives and electricity.
Magnesia Ceramic Adhesives
1650°C - Resbond® 906
Resbond® 906 Magnesia based Adhesive was formulated for bonding high expansion materials for use to 1650°C. Bonds to steel, stainless, aluminium, brass, copper, silver, nickel and other high expansion materials.
1530°C - Resbond® 919
Resbond® 919 was formulated with Cotronics®’ proprietary ceramic binders to offer an adhesive with exceptionably high electrical resistance. These special binders maintain their high electrical resistance and dielectric strength even when exposed to temperatures up to 1530°C.
3000°C - Resbond® 931
Resbond® 931 bonds Graphite or Carbon components for use to 3000°C with 99% pure graphite. Just apply and cure at 120°C. 931 pure Graphite Adhesive has excellent adhesion to graphite, and other porous surfaces, forming graphite to graphite bonds with strengths measuring. It is electrically conductive and resistant to reducing atmospheres, most chemicals and solvents.
1370°C - Resbond® 931C
Resbond® 931C has excellent adhesion to graphite, metals, glass, ceramics and non-porous parts. Just re-mix, apply and let dry. 931C cures at room temperature without heat.
Adhesives with metallic charge
1093°C - Resbond® 940SS
Resbond® 940SS is a 316 Stainless Steel based, fast curing adhesive with excellent adhesion and heat resistance. This 1100°C, Stainless Steel Adhesive bonds, repairs and seals high temperature equipment. It is machinable and resistant to most chemicals and solvents.
650°C - Durabond® 950
Resbond® 950 is easy to apply and cures at low temperature. Use with steel, cast iron, aluminium, copper, etc. Its easily machinable. Can be ground, sanded or polished.
1093°C - Durabond® 952
Resbond® 952 was specially formulated to be a low expansion, metallic adhesive for bonding 400 series Stainless Steel, low expansion high temp. alloys, metals and ceramics, etc.
1093°C - Durabond® 954
Resbond® 954 is a high expansion adhesive for high temp. bonding of 300 series Stainless, high expansion metals, ceramics, etc.