Electrically Conductive Adhesive

Electrically conductive adhesive

Die Cotronics® Produkte sind in Deutschland nicht verkauft ⚠

Cotronics® Duralco® conductive adhesives and potting compounds provide the conductivity required for many high temperature electronic and industrial applications. These ultra-temperature adhesives combine Cotronics®’ unique resins and hardeners with specialty conductive fillers to provide continuous service up to 340°C. They will bond to glass, ceramics, metals and plastics and offer excellent resistance to most chemicals and solvents.

Electrically conductive Epoxy Applications

  • Solder replacement,
  • Semi-conductor bonding,
  • Shielding,
  • Electronics,
  • Circuit board repair…

Electrically conductive Epoxy Technical data

Composition

Electrically Conductive Epoxy

Duralco®

120

122

124

125

126

127

Charge

Silver

Nickel

Silver

Silver

Silver

Graphite

Max. Temp. °C

260

260

340

230

230

200

Viscosity cps

25 000

25 000

20 000

50 000

15 000

50 000

Thermal Conductivity W/m.K

7.2

2.16

7.2

5.76

7.2

3.6

Resistivity Ω.cm

0.00008

0.7

0.002

0.002

0.002

0.02

Components

2

2

2

2

1

2

Cure Cycle

h @ 24°C

24

24

-

8

-

24

Cure Cycle

m @ 95°C

-

-

4 h @ 120°C

30 m @ 65°C

1-2 h @ 120°C or 30 m @ 135°C or 1-5 m @ 150°C

-

260°C - Duralco® 120

Hi-conductive Silver based Epoxy

Duralco® 120 is a Silver filled Epoxy that cures at room temp. to form electrically conductive bond lines for use to 260°C. Contains over 70% Ultra Fine Active Silver to provide the ultimate in electrical conductivity. Resistance of 0.00008 Ω.cm have been reported in independent tests. Duralco® 120 is ideal for forming electrically conductive bonds, attaching heat sensitive components and as a solder replacement.

260°C - Duralco® 122

Low Cost Nickel based Epoxy

Duralco® 122 is a Nickel filled Adhesive and casting Epoxy, formulated to provide an economical alternative to silver filled, electrically conductive epoxies. Duralco® 122 is low in cost and highly conductive. It is ideal for use in applications where the upmost in electrical conductivity is not required. Can be used to 260°C.

340°C - Duralco® 124

Ultra-temperature Silver based Epoxy

Duralco® 124 is a two component, silver filled adhesive for High Power applications. Just mix and cure with mild heat. Can be used up to 340°C.

230°C - Duralco® 125

Flexible conductive Silver based Epoxy

Duralco® 125 is easy to use, "one to one", applicator kit. Just dispense, mix and apply this smooth creamy paste and cure at room temp. Bonds to most metals, ceramics, and plastics to form stress free, electrically conductive bonds.

230°C - Duralco® 126

One component, Silver based Epoxy

Duralco® 126 is a one component, highly conductive epoxy specifically designed for production applications. No mixing. no mess. Just dispense and heat cure. Commonly used in automatic dispensing equipment.

200°C - Duralco® 127

Graphite based Dispenser Kit

Duralco® 127 is easy to use, "one to one", applicator kit. Just dispense, mix and apply. This smooth creamy paste cures at room temp. and is ideal for low cost production applications. Can be used in automatic dispensing equipment.

Electrically Conductive Epoxy (682.83k)

Technisches Datenblatt Cotronics® electrically conductive Epoxy adhesives.


Duralco® 120 Adhesive epoxy

Duralco® 120 Adhesive epoxy

Cotronics Duralco® 120 adhesive is a bonding epoxy resin. It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with silver powder. This adhesive is a good electric conductor. This product is available in 52 grammes.
Zugriff auf die vollständige Beschreibung
Duralco® 122 Adhesive epoxy

Duralco® 122 Adhesive epoxy

Cotronics Duralco® 122 adhesive is a bonding epoxy resin. It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with nickel powder. This adhesive is a good electric conductor. This product is available in 113 grammes.
Zugriff auf die vollständige Beschreibung
Duralco® 124 Adhesive epoxy

Duralco® 124 Adhesive epoxy

Cotronics Duralco® 124 adhesive is a bonding epoxy resin. It is used to make high temperature bonding, up to 340°C. This 2 components epoxy adhesive is charged with silver powder. This adhesive is a good electric conductor. It needs a heat curing. This product is available in 64 grammes.
Zugriff auf die vollständige Beschreibung
Duralco® 125 Adhesive epoxy

Duralco® 125 Adhesive epoxy

Cotronics Duralco® 125 adhesive is a bonding epoxy resin. It is used to make high temperature bonding, up to 230°C. This 2 components epoxy adhesive is charged with silver powder. This adhesive is a good electric conductor. This product is available in cartridge of 28 grammes and in 225 grammes jar. For bigger packaging please contact us.
Zugriff auf die vollständige Beschreibung
Duralco® 126 Adhesive epoxy

Duralco® 126 Adhesive epoxy

Cotronics Duralco® 126 adhesive is a bonding epoxy resin. It is used to make high temperature bonding, up to 230°C. This single component epoxy adhesive is charged with silver powder. This adhesive is a good electric conductor. This product is available in 52 grammes.
Zugriff auf die vollständige Beschreibung
Duralco® 127 Adhesive epoxy

Duralco® 127 Adhesive epoxy

Cotronics Duralco® 127 adhesive is a bonding epoxy resin. It is used to make high temperature bonding, up to 200°C. This 2 components epoxy adhesive is charged with graphite powder. This adhesive is a good electric conductor. This product is available in syringe of 56 grammes.
Zugriff auf die vollständige Beschreibung
Duralco® 128 Adhesive epoxy

Duralco® 128 Adhesive epoxy

Cotronics Duralco® 128 adhesive is a bonding epoxy resin. It is used to make high temperature bonding, up to 260°C. This 2 components epoxy adhesive is charged with alumina powder. This adhesive is a good electric conductor. This product is available in 0,23, 0,47 and 3,7 grammes. For bigger packaging please contact us.
Zugriff auf die vollständige Beschreibung