Shapal M™ machinable ceramic
Final Advanced Materials provides Shapal M™ machinable aluminium nitride : rods, boards or machined parts according to your drawings.
It is an electrical insulating refractory material having very high thermal conductivity, higher than that of copper at 200°C, and showing high resistance to oxidation and abrasion. Unlike sintered ceramics, machining with conventional tools is possible.
Shapal M™ Ceramic applications
- Electronic component
- Component in low dielectric constant applications
- Fixatures in low thermal expansion applications
Technical data
|
Properties |
Units |
Shapal M™ |
|
Physical characteristics |
||
|
Density |
g/cm3 |
2.9 |
|
Porosity |
% |
0 |
|
Water uptake |
% |
0 |
|
Mechanical characteristics |
||
|
Hardness |
Vickers: 3900 Mpa |
|
|
Compressive Strength |
N/mm2 |
1200 |
|
Flexural Strength |
N/mm2 |
300 |
|
Modulus of Elasticity |
GPa |
190 |
|
Thermal characteristics |
||
|
Peak Temperature |
°C |
1000 |
|
Continuous Temperature |
°C |
1000 |
|
Specific Heat at 20°C |
J/kg°K |
/ |
|
Thermal Conductivity at 100°C |
W/m°K |
90 |
|
Coefficient of Expansion 20 - 40°C |
10-6/°K |
/ |
|
20 - 600°C |
4.4 |
|
|
20 - 800°C |
4.8 |
|
|
20 - 1000°C |
5.1 |
|
|
Electrical characteristics |
||
|
Specific Resistivity at 20°C |
Ohm.cm |
1012 |
|
Dielectric Constant at 20°C |
at 1 KHz |
7.1 |
|
Loss Tangent |
at 1 KHz |
0.001 |
|
Dielectric Strength at 20°C |
kV/mm |
40 |
|
Chemical characteristics |
||
|
Corrosion resistance at 20°C |
/ |
|
|
Resistance to alkalis at 20°C |
/ |
|
This Shapal M™ ceramic is available in bars (maxi D.58x300mm), in plates (maxi 315x200x60mm) or in parts machined by ourselves according to plans.