Aramid Fibre Grip Tapes 300°C

Aramid Fibre Grip Tapes, up to 300 °C

Made of aramid loops and polyamide monofilament hooks, high-temperature grip tapes are self-extinguishing and non-melting. They resist to a continuous temperature of 140 °C, to cold, and to general chemical products (excluding acids) and are certified to aeronautical and automobile standards.

The grip tapes exist with stainless steel hooks which improve their thermal resistance up to 235 °C.

General Characteristics of Aramid Grip Tapes

Physical Properties:

• Thickness of closure: 3.1 mm (hooks: 1.6 mm/loops: 2.5 mm) 
• Density by surface area: 0.078 g/cm²

Mechanical Properties:

• Rupture point of strip: 300 N/cm 
• Elongation at rupture: 70 % 
• Pull-out resistance: 1 N/cm(0.8 N/cm after 1,000 cycles) 
• Shear strength: 7 N/cm² (5 N/cm2 after 1,000 cycles) 
• Tensile strength: 4.5 N/cm² (3.5 after 1,000 cycles) 

Thermal Properties:

• Operating temperature: 140 °C or 235 °C (hooks)
• Peak temperature: 260 °C (hooks) 
• Resistance to negative temperatures 

Chemical Properties:

• Good resistance to alkalis, solvents, hydrocarbons and alcohols 
• Low resistance to acids

Standards

• Aeronautics: FAR/EASA CS 25-853 Appendix F Part 1 (a) (1) (ii) 12s.
• Automobile: FMVSS-302

Maintenance of Aramid Grip Tapes

• Washable at 95 °C 
• Suitable for dry cleaning 
• Suitable for ironing (with tape closed) 

Applications of Aramid Grip Tapes

• Military: production of camouflage uniforms and equipment
• Automobile: passenger compartment fixings
• Aeronautics: attachment of thermal insulation

Technical Data of Aramid Grip Tapes

Physical variables included in this documentation are provided by way of indication only and do not, under any circumstances, constitute a contractual undertaking. Please contact our technical service if you require any additional information.