Share this page by mail High Temperature ZetexPlus® Fibre Fabrics 1,095 °C
ZetexPlus® Fibre Fabrics, up to 1,095 °C
Our partner Newtex offers a wide range of fire resistant and extreme temperature resistant products since 1978. The ZetexPlus® range features a great variety of insulating textiles and heat protection which can withstand temperatures up to 1,095 °C. Due to their characteristics and performances, these products can be used for numerous applications: gaskets, compensators, heat reflectors, curtains, protective covers and clothing, etc.
ZetexPlus® fibre fabrics are mainly used for thermal insulation and sealing of industrial furnaces. They are woven from highly texturized continuous glass filament and show great thermal and insulation properties. These fabrics can withstand operating temperatures up to 815 °C and peak temperatures up to 1,095 °C.
ZetexPlus® fibre fabrics also stand out for their great mechanical resistance as well as their chemical resistance.
For more information regarding the availability, refer to the technical data sheet.
Applications of ZetexPlus® Fibre Fabrics
- Gasket
- Compensators
- Heat reflectors
- Curtains
- Covers
- Protective clothing
General Data: ZetexPlus Fibre Fabrics
Technical Data of HT ZetexPlus® Fibre
Physical variables included in this documentation are provided by way of indication only and do not, under any circumstances, constitute a contractual undertaking. Please contact our technical service if you require any additional information.
ZetexPlus® fabrics
FAQs that can help you in this category
Final Advanced Materials offers a very wide selection of fabrics which can withstand temperatures ranging between -72°C and +2,000°C. For applications reaching temperatures as high as 550°C, fibreglass-based fabrics are the most versatile. They combine high mechanical and chemical resistances and are also effective electrical and thermal insulators. For applications with a continuous exposure to temperatures over 500°C, fabrics made from basalt fibre (800°C), silicate fibre (1,000°C) or ceramic fibre (1,300°C) are recommended. The choice of fabric depends on the desired application. Whether for insulation or protection, the service conditions are a determining factor for the choice of fabric.
The Zetex and ZetexPlus fabrics produced by Final Advanced Materials are both high-temperature fibreglass fabrics, used for thermal protection or insulation applications. Zetex fabrics are suitable for standard uses, with a resistance to temperatures of 540°C in continuous service and up to 700°C short-term. ZetexPlus fabrics are given a vermiculite-based treatment which improves their resistance to abrasion and mechanical stresses, while enabling them to withstand high temperatures, 815°C in continuous service, and up to 1,095°C short-term. The choice between these two materials therefore depends primarily on the working conditions.
Final Advanced Materials offers a wide range of products for extreme applications. Ceramic fibre-based and silicate fibre-based textiles are mainly used to manufacture parts in the aeronautical and aerospace sector.
They have an excellent thermal shock resistance, and can withstand exposure to temperatures of over 1,200°C short-term. These products are available in a wide range of forms, such as fabrics, braids, sleeves, tapes and non-wovens.
The ceramic fibre fabrics and the silica fibre fabrics offered by Final Advanced Materials are designed for the most extreme applications. When made into a fabric, ceramic fibres have a better stability at high temperature than silica-based fibres. Silica fibres have inferior mechanical properties and have a high shrinkage rate of 7 to 12%. It is however possible to thermally treat silica fabrics to reduce this shrinkage to only 1 to 4%.